User Tools

Site Tools


how_to_create_a_live_boot_device

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

how_to_create_a_live_boot_device [2018/09/28 19:52]
admin created
how_to_create_a_live_boot_device [2018/09/28 19:53] (current)
admin
Line 6: Line 6:
  
 You need a USB Key of at least 4GB for parrot full or 2GB for the lite edition. You need a USB Key of at least 4GB for parrot full or 2GB for the lite edition.
 +
  
 ====== BlackWeb Live Install Procedure ====== ====== BlackWeb Live Install Procedure ======
Line 12: Line 13:
 Plug your USB stick into your USB port and launch the [[https://​etcher.io/​|Etcher]] or [[https://​rufus.akeo.ie/​|Rufus]] software. ​ Plug your USB stick into your USB port and launch the [[https://​etcher.io/​|Etcher]] or [[https://​rufus.akeo.ie/​|Rufus]] software. ​
  
-Select the Parrot ​ISO file and verify that the USB drive you are going to overwrite is the correct one.+Select the BlackWeb ​ISO file and verify that the USB drive you are going to overwrite is the correct one.
  
-Once the imaging is complete, you can use the usb stick as the boot device for your computer and boot into Parrot ​OS. +Once the imaging is complete, you can use the usb stick as the boot device for your computer and boot into BlackWeb ​OS.
-How to boot+
  
-If you don't know how to boot with your new bootable device follow this guide → how to boot 
-Persistence 
  
-You can find some guidelines about how to create a live device with Persistence here –> Parrot USB Live Persistence 
  
how_to_create_a_live_boot_device.txt · Last modified: 2018/09/28 19:53 by admin

(C) BlackWeb Security 2017 - 2019